1.0mm Torque Wrench Kit Click Type with .20" and .175"
Part NO.:RF-Torque Wrench Kit-1.0mm-GOSTOCK-0001
Wrench Heads Preset to 8.0 in-lbs
Preset wrench handle to 8.0 in-lbs (±4% Tolerance)
1.0mm thread in connector Installation Kit
This RF-Torque Wrench Kit-1.0mm-GOSTOCK-0001 is designed to be used with Southwest Microwave 1.0mm thread in connectors when mounting the connector into an assembly. The kit includes one preset torque wrench with with 2 Wrench Heads. One is .175" and the second is .200." Please refer to the datasheet as one HEX bit corresponds to the male and the other to the female connector.
Preset torque wrenches are used to properly mate RF Hex Connectors with proper force to ensure a good mate and prevent damage to the center conductors or cause thread stripping. Preset Torque wrenches are available from GO-STOCK Components for various types of coaxial connectors. GO-STOCK offers both the breakover and click type wrenches. Every connector has a different torque setting depending on materials and hex size. Please refer to the table below for additional information.
Part Number: RF-Torque Wrench Kit-1.0mm-GOSTOCK-0001 Preset wrench handle to 8.0 in-lbs (±4% Tolerance)